![SELMI MOULD LOADER 175 SELMI MOULD LOADER 175](graphics/00000001/SELMI Mould Loader 175 (large).jpg)
Description
Designed to automate the filling of moulds, the SELMI MOULD LOADER 175 connects to the SELMI TOP continuous tempering machine and can fill & vibrate polycarbonate moulds measuring 275mm x 175mm) at up to 6 moulds per minute.
The SELMI MOULD LOADER 175 incorporates three separate workstations each performing a different task:
1) Filling of mould - SELMI offer two versions of MOULD LOADER 175 - controlled deposit via an injection head or flood directly from tempering machine then scrape across the back of the mould
2) 1st level vibration
3) 2nd level vibration
The filled moulds are then ejected and raised & pushed onto a special slide that fits inside a SELMI Cooling Tunnel. This ensure even cooling of the mould and facilitates double the cooling (i.e. 16 metres of cooling in an 8 metre tunnel)
Because of the high volume of production, it is recommended that the tempering machine is connected to a SELMI TANK 200 or TANK 400 fitted with a level sensor to ensure the constant flow of melted chocolate.
In addition to the standard MOULD LOADER 175 with Elevator & Pusher (injection system or scraper system), SELMI also offer a linear version that can feed directly into a SELMI SPIDER Vertical Cooling System. Price available on application.
Technical Data:
Electrical Specification: 220V - Single Phase - 50Hz
Power Required: 1.5kW - 16A - 5 Poles
Production Capability: 250 to 300 moulds per hour
Dimensions: H 1500mm, W 2300mm D 950mm
Features:
Highly efficient way of making bars, tablets, neopolitains and more.
Must be connect to a source of compressed air that offers 220 litres per minute at a minimum of 6 bar and filtered for oil & water.
Price shown above excludes delivery from Italy & VAT
All SELMI machines come with two years warranty supported by our in-house team of three full-time, SELMI trained engineers.
Plese note we can only ship SELMI machinery and parts within the UK and Ireland.